How to Knit a Heart (Easy Garter Stitch Heart Pattern)

KnittingEasy14:5110 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Knit a Heart (Easy Garter Stitch Heart Pattern)

By Show Me Step by StepPublished

Based on a video by B.Hooked Crochet.

A knitted heart is a small, flat project you can finish in about an hour. Brittany from B.Hooked knits this one in garter stitch, so every row is a knit row and there is no purling at all. The heart is worked sideways: you start at one side, grow the first hump and the point, then mirror everything to make the second side. It uses about 12 yards of yarn, so it is a good way to use up leftovers.

How to knit a heart: the short version

  • Cast on 7 stitches and knit one row.
  • Increase with KFB at both ends until you have 15 stitches.
  • Grow the point with a KFB at one end.
  • Hold the count at 18 with an SSK at the top and a KFB at the point.
  • Reverse it: KFB at the top, K2tog at the point.
  • Decrease back down to 7 stitches and bind off.

What you need

Any medium weight (worsted) yarn works. Brittany uses an alpaca blend because it looks soft and a little fuzzy. Pair it with US 7 (4.5 mm) needles. Straight, circular or double pointed needles are all fine for a piece this small. You also need a yarn needle and scissors to finish.

Keeping track of the rows

This is not a hard pattern, but it has a lot of short repeats. Every pair of rows is a shaping row followed by a plain knit row. The plain rows always run from the point toward the top of the heart, which tells you where you are if you put it down. Print the free pattern and tick off each row, or click a row counter as you go. Count your stitches at the end of every repeat.

The three stitches you need

KFB (knit front and back) adds a stitch: knit it, leave it on, then knit the back loop. SSK (slip, slip, knit) takes away a stitch and leans left. K2tog (knit two together) takes one away and leans right. Using the right decrease on each side keeps the curves of the heart smooth.

Changing the size

The finished heart is about 4 inches across in worsted yarn. For a smaller heart, use a lighter yarn with smaller needles and follow the same rows. Bulky yarn on bigger needles gives a chunky heart for a pillow applique or a door hanger. The stitch counts do not change, only the yarn and needle size.

Ways to use your hearts

  • Sew one onto a hat, scarf, bag or jacket as a patch.
  • Knit two, sew them together and stuff them for a little softie.
  • Tuck one into a Valentine's card or a gift for a grandchild.
  • String several on yarn for a garland.

Common problems

  • Lopsided humps. Count after each repeat. One missed increase shows.
  • A boxy top edge. The bind-off edge is flatter than the cast-on side. Run the tail along it and pull gently to round it.
  • A loose first stitch. Tug the cast-on tail after the first row.

Keep knitting

New to the basics? Review how to cast on, increase, decrease and bind off. If you also crochet, try a crochet heart to go with it.

What you'll need

Step-by-Step Guide

10 steps · about 15 minutes.Check off each step as you go and your progress saves automatically.

1

Cast On 7 Stitches for the Knitted Heart

1:28
Step 1: Cast On 7 Stitches for the Knitted Heart - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Cast on 7 stitches with your favorite method. Brittany uses double pointed needles because they are easy to film, but straight or circular needles work the same. Turn the work and knit every stitch across the first row. If the very first stitch looks loose, give the tail a gentle tug to snug it up. Then turn again so you are ready for the first increase row.

Tip

Leave a tail of about 6 inches. You will weave it in or use it to sew the heart on later.

2

Increase With a Knit Front and Back on the Knitted Heart

2:20
Step 2: Increase With a Knit Front and Back on the Knitted Heart - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Row 2 adds a stitch at each end with a KFB. Insert the needle knitwise, wrap the yarn and pull it through as if you were knitting, but do not slide the old stitch off. Swing the needle to the back, go into the back loop, wrap and knit it off. Knit across to the last stitch and KFB again. You now have 9 stitches. Turn and knit row 3.

Tip

The KFB leaves a little bar under the new stitch. That is normal.

3

Repeat the Increases to Shape the Knitted Heart's First Curve

4:18
Step 3: Repeat the Increases to Shape the Knitted Heart's First Curve - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Work rows 2 and 3 three more times. Each repeat adds two stitches, so you end with 15. Spread the stitches out on the needle and look. You have a rounded half circle. The curved side becomes one hump of the heart, and the far end is where the point will grow. Knit to the last stitch and KFB on the next rows to start that point.

Tip

Count your stitches after each repeat. It is much easier to fix now than later.

4

Start the Dip of the Knitted Heart With an SSK Decrease

6:15
Step 4: Start the Dip of the Knitted Heart With an SSK Decrease - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

On row 16, start with an SSK. Slip the first two stitches knitwise, one at a time, to the right needle. Put the left needle into the front of both and knit them together. This left leaning decrease shapes the dip at the top of the heart. Knit to the last stitch and KFB, so the point keeps growing. Turn and knit row 17.

Tip

Your plain knit rows always run from the point toward the top. Use that to find your place.

5

Check the Knitted Heart at the Halfway Point

7:50
Step 5: Check the Knitted Heart at the Halfway Point - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Repeat rows 16 and 17 three more times. Your count stays at 18 the whole way, because you take one stitch away at the top and add one at the point. When you finish, hold the work up. You should see one full hump and a long point. You are now halfway, and everything from here is the mirror image of what you have knit.

Tip

Tally marks on a printed pattern help you track these repeats.

6

Shape the Second Half of the Knitted Heart With K2tog

8:40
Step 6: Shape the Second Half of the Knitted Heart With K2tog - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

On row 24, KFB in the first stitch to start the second hump. Knit to the last two stitches and knit them together. A K2tog is a right leaning decrease. Put the needle through both stitches at once and knit them as one. It matches the SSK on the other side, so the heart stays even. Turn and knit the next row, then repeat rows 24 and 25 three more times.

Tip

The count stays at 18 through this repeat too.

7

Knit the Second Hump of the Knitted Heart

10:43
Step 7: Knit the Second Hump of the Knitted Heart - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Now the point starts to shrink. On row 32, knit to the last two stitches and K2tog, bringing you to 17 stitches. Turn and knit the next row. Repeat rows 32 and 33 two more times so you end with 15. Lay the work flat. You will see the full heart shape: two rounded humps and a point, with only the last curve left to close.

Tip

If one hump looks bigger, count the rows on each side before you go on.

8

Decrease at Both Ends to Close the Knitted Heart

11:03
Step 8: Decrease at Both Ends to Close the Knitted Heart - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Row 38 decreases at both ends. Start with an SSK, knit across to the last two stitches, and finish with a K2tog. That takes you to 13 stitches. Turn and knit row 39. Repeat rows 38 and 39 three more times. Each pair takes away two stitches and rounds off the second hump, until you are back to 7 stitches, the same as your cast on.

Tip

Matching 7 stitches at each side keeps the two humps the same size.

9

Bind Off the Last Stitches of the Knitted Heart

12:58
Step 9: Bind Off the Last Stitches of the Knitted Heart - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Knit the first two stitches. Use the left needle to lift the first loop over the second and off the needle. Knit one more stitch and pass the first loop over again. Keep going across until one loop is left. Pull that loop up, cut the yarn with a tail and pull the tail through the loop to lock it.

Tip

Bind off loosely. A tight bind off pulls the edge of the hump flat.

10

Smooth the Knitted Heart's Edge With the Yarn Tail

13:20
Step 10: Smooth the Knitted Heart's Edge With the Yarn Tail - How to Knit a Heart (Easy Garter Stitch Heart Pattern)

The bind-off edge is boxier than the cast-on side. To soften it, thread the tail on a yarn needle and run it along that edge. Pull it gently so the corner rounds out to match the other hump. Play with it until it looks right to you. Then keep the tails for sewing the heart onto a project, or weave them in along the edges and trim.

Tip

Steam the heart lightly with an iron held above it to help it lie flat.

How to Knit a Gauge Swatch That Measures True

Keep going

How to Knit a Gauge Swatch That Measures True

Products Used

The Checklist

How to Knit a Heart (Easy Garter Stitch Heart Pattern)

Tools
4
Materials
1
Steps
10
Video
15 min

Tools we recommend

Your Guide

B.Hooked Crochet

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New knitting tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this knitting tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.