How to Make an Origami Penguin (Easy for Kids)

Paper CraftsEasy7:0510 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make an Origami Penguin (Easy for Kids)

By Show Me Step by StepPublished

Based on a video by Art for Kids Hub.

This origami penguin is one of the easiest animals you can fold, and it stands up on its own when you finish. Rob from Art for Kids Hub folds it alongside his young daughter, so every step is slow and kid friendly. You need one square of paper and a marker. Most people finish their first penguin in about ten minutes.

How to make an origami penguin: the short version

  • Fold a square in half corner to corner, color side out.
  • Fold both sides in like paper airplane wings.
  • Guide fold and reverse fold the top point to make the head.
  • Guide fold and tuck the bottom point to flatten the belly.
  • Guide fold, tuck and pull out the beak, then draw eyes.

What paper to use

Origami paper is colored on one side and white on the other, which is what gives this penguin its white belly. Six inch squares are a good size for small hands. Black paper makes a classic penguin, but blue, mint or patterned paper is fun too. No origami paper? Cut printer paper into a square. It is thicker, so press every crease hard.

What a guide fold is

A guide fold is a crease you make, press flat and then unfold. It does not change the shape. It marks a line so the next fold, usually a reverse fold, knows exactly where to go. This penguin uses three of them: one for the head, one for the belly and one for the beak. Crisp guide folds make the tricky steps much easier, so run a fingernail or a bone folder along each one.

Reverse folds made simple

A reverse fold turns a point inside out along a guide crease. Open the layers a little, push the point back on itself along the crease, then flatten it. For the head, the point flips out so the colored side shows. For the belly, it tucks inside. If a reverse fold fights you, open the layers wider and re-press the guide crease first.

Folding with kids

Fold your own penguin one step ahead so a child can copy the shape, the way Rob does in the video. Let them do the easy folds and the squishing, and help with the reverse folds. Bigger paper is easier for little fingers. Skip the feet for younger kids; the penguin still stands without them.

How long it takes

Your first penguin takes about ten minutes while you learn the reverse folds. After two or three, you can fold one in under five minutes, which makes it a good rainy day or classroom project when you need a whole flock.

Ideas for your penguins

  • Fold a family in three sizes of paper.
  • Glue one to a folded card for a winter greeting.
  • Add a tiny paper scarf or a pom pom hat for the holidays.
  • Line them up on a windowsill as a winter display.

Common problems

  • Penguin will not stand. Flatten the belly fold and spread the bottom edges a little.
  • Head looks lumpy. Crease the guide fold harder before reversing it.

More easy folds: start with origami basics, then try an origami cat, a jumping frog or an origami fish.

What you'll need

Step-by-Step Guide

10 steps · about 7 minutes.Check off each step as you go and your progress saves automatically.

1

Fold the Origami Paper Square Into a Triangle

0:33
Step 1: Fold the Origami Paper Square Into a Triangle - How to Make an Origami Penguin (Easy for Kids)

Start with a square of origami paper, color side up. Take the bottom corner and fold it up to meet the top corner so you have a triangle. Line the edges up neatly, then press the crease flat from the middle out to each side. Printer paper cut into a square works if you have no origami paper, though the belly will be white on both sides.

Tip

A sharp first crease makes every later fold line up better.

2

Fold the Penguin Wing Like a Paper Airplane

0:52
Step 2: Fold the Penguin Wing Like a Paper Airplane - How to Make an Origami Penguin (Easy for Kids)

Turn the triangle so the long folded edge runs along one side. Take one corner and fold it down at an angle, the way you would start a paper airplane. Do not fold it all the way to the center line. Leave a point sticking out past the edge so it looks like a wing. That colored flap becomes one side of the penguin's back.

Tip

Leave a little white showing; that strip becomes the penguin's belly.

3

Fold the Second Penguin Wing to Match

1:18
Step 3: Fold the Second Penguin Wing to Match - How to Make an Origami Penguin (Easy for Kids)

Flip the paper over and repeat on the other side. Fold the matching corner down so its edge lines up with the fold you made a moment ago. Now both sides match and the shape looks like a paper airplane. Turn it so the point is at the top. The colored flaps are the wings and the white strip down the middle is the belly.

Tip

Hold the first wing flat while you fold the second so it does not shift.

4

Make a Guide Fold for the Origami Penguin Head

1:44
Step 4: Make a Guide Fold for the Origami Penguin Head - How to Make an Origami Penguin (Easy for Kids)

Take the top point and fold it down to make the head. Make it fairly long; you can bring it down further than you think. Crease it hard, nice and crisp. This is a guide fold, so unfold it again once the crease is pressed in. The line it leaves shows exactly where the head will bend in the next step.

Tip

Run a fingernail or bone folder along the crease to make it sharp.

5

Reverse Fold the Origami Penguin Head

2:42
Step 5: Reverse Fold the Origami Penguin Head - How to Make an Origami Penguin (Easy for Kids)

Open the penguin's body a little so you can see the guide crease inside. Flip the head point the other way along that crease so it turns inside out, then fold the body back together and squish it flat. The head should now be solid color on both sides. This reverse fold is the trickiest move, so take your time and help little ones.

Tip

If it will not flip, open the layers wider and press the crease again.

6

Make a Guide Fold to Flatten the Penguin Belly

3:02
Step 6: Make a Guide Fold to Flatten the Penguin Belly - How to Make an Origami Penguin (Easy for Kids)

The bottom of the penguin is pointed, so it will not stand yet. Take the bottom corner and fold it over until it meets the opposite edge. Crease it down firmly, then hold it in place and press it again. This is another guide fold. Open it back up when you are done so the crease is ready for the tuck.

Tip

The straighter this crease, the steadier your penguin will stand.

7

Tuck the Bottom Point Inside the Penguin Belly

3:34
Step 7: Tuck the Bottom Point Inside the Penguin Belly - How to Make an Origami Penguin (Easy for Kids)

Open the bottom layers a little, the same way you did for the head. This time push the point inside, reverse folding it along the guide crease so it disappears into the belly. Squish it back down. For feet, pull a small corner of that tucked point back out until a little triangle pokes out the front. Rob skips the feet to keep things easier.

Tip

Feet are optional. The penguin stands either way.

8

Make Guide Folds for the Origami Penguin Beak

4:28
Step 8: Make Guide Folds for the Origami Penguin Beak - How to Make an Origami Penguin (Easy for Kids)

The head sticks out a long way, so the beak comes from that tip. Fold the end of the head back toward the body to mark where the beak starts. A smaller fold makes a shorter beak. Press it, then fold that same tip back out the other way and press again. Now you have two guide creases. Unfold both before the last step.

Tip

Start with a small beak fold. You can always make it bigger.

9

Tuck and Reverse the Origami Penguin Beak

5:34
Step 9: Tuck and Reverse the Origami Penguin Beak - How to Make an Origami Penguin (Easy for Kids)

Open the bottom of the head a little. Using the first guide crease, tuck the beak back inside the head so it disappears. Then use the second crease to reverse the very tip back out, so a small beak sticks forward. Squish the head flat to lock it. Your penguin should now have a solid head and a little pointed beak.

Tip

Press the beak between finger and thumb so it holds its point.

10

Draw Eyes on the Origami Penguin

6:24
Step 10: Draw Eyes on the Origami Penguin - How to Make an Origami Penguin (Easy for Kids)

Give your penguin eyes with a black marker. Draw a circle on one side of the head and color it in. Flip the penguin over and draw a matching eye on the other side. Rob adds a dot of white colored pencil to each eye as a highlight. Stand your penguin up, nudge the bottom flat if it wobbles, and fold a few friends.

Tip

Eyelashes, rosy cheeks or a tiny bow tie all add personality.

How to Make a Paper Wallet (Easy Origami, No Glue)

Keep going

How to Make a Paper Wallet (Easy Origami, No Glue)

Products Used

The Checklist

How to Make an Origami Penguin (Easy for Kids)

Tools
3
Materials
1
Steps
10
Video
7 min

Tools we recommend

Your Guide

Art for Kids Hub

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New paper crafts tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Related collections

Curated theme pages that include this tutorial.

Weekly Digest

Liked this paper crafts tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.