How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

PotteryEasy5:207 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

By Show Me Step by StepPublished

Based on a video by Merry Maker Studio.

A red and white clay toadstool is about the cutest thing you can make with two blocks of clay and a pencil. Merry Maker Studio shows how in about five minutes of video: roll a stem, pinch a cap, add white dots and bake. No sculpting tools and no experience needed. They look sweet in a fairy garden, a potted plant or a dollhouse.

How to make a clay mushroom: the short version

  • Roll white clay into a log and taper one end for the stem.
  • Roll five to ten tiny white balls for the dots.
  • Open a red ball with a pencil and pinch it into a cap.
  • Twist the cap onto the stem and press on the dots.
  • Bake following the clay package.

What clay to use

The video uses Sculpey polymer clay, which stays soft until you bake it in a home oven. Any brand works. You can also use air dry clay and paint it red once dry, which is handy if you would rather not use the oven. Air dry clay is more fragile, so keep those mushrooms indoors.

Keep the white clean

Red clay stains your fingers, and the stain transfers to white clay. That is why the stem and the dots come first. Once you start on the red, finish all the shaping and smoothing before you touch the white again. Then wash your hands well, or wipe them with a baby wipe, before you put the mushroom together.

The pinch pot trick

The cap is a tiny pinch pot. Put your thumb inside, fingers outside, and pinch and turn until the walls are as thin as you like. If you have never made one, how to make a pinch pot shows the same move on a bigger scale. Flaring the bottom edge outward is what makes it look like a real toadstool instead of a bowl.

Baking

Bake on a tile or a sheet of paper on a baking tray, at the temperature and time printed on your clay. Thick pieces like the stem need the full time. An oven thermometer helps, since many home ovens run hot and can scorch white clay. See how to bake polymer clay for the details. Let the mushroom cool fully before handling; polymer clay is soft while warm.

Making them with kids

This is a great first clay project for children and grandchildren. Rolling balls and logs is easy for small hands, and the pencil trick takes the hard part out of shaping the cap. An adult should handle the craft knife and the oven. Give each child their own color set and let them invent spotted, striped or rainbow toadstools.

Size and proportions

The finished mushroom in the video is small enough to hold between two fingers. Keep the red cap a little smaller than the stem clay and it balances well. For tiny fairy garden mushrooms, halve every piece; for a chunky shelf decoration, double them and bake a little longer.

Ideas and variations

  • Make a cluster in three sizes and glue them to a pebble.
  • Try a brown cap with cream dots for a woodland look.
  • Push a wire hook in before baking to make an ornament.
  • Tuck them into a fairy garden or a houseplant pot.

Common problems

  • Cracked clay. It is too cold or too dry. Warm it in your hands and knead it longer.
  • Cap falls off after baking. Press and twist it on firmly before baking, or add a dab of liquid clay inside the cap.

What you'll need

Step-by-Step Guide

7 steps · about 5 minutes.Check off each step as you go and your progress saves automatically.

1

Cut the White and Red Polymer Clay

0:37
Step 1: Cut the White and Red Polymer Clay - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Gather white and red polymer clay, a craft knife and a pencil. Cut the white block in half; one half becomes the stem and the rest is for the dots. Cut a piece of red about the same size as the white, or a touch smaller, for the cap. A regular kitchen knife works if you do not have a craft knife. Set the extra clay aside, wrapped so it stays clean.

Tip

Warm each piece in your hands for a minute so it rolls without cracking.

2

Roll the White Clay Into a Tapered Mushroom Stem

1:24
Step 2: Roll the White Clay Into a Tapered Mushroom Stem - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Roll the white clay into a smooth ball on the table, then roll it back and forth into a log. Now roll only one end under your fingers so it tapers, thick at the bottom and thinner at the top, like a real mushroom stem. Round off both ends with a gentle roll so they are smooth. Set the stem aside while you make the rest.

Tip

A slightly thick base helps the mushroom stand up on its own.

3

Roll Tiny White Clay Balls for the Mushroom Dots

2:08
Step 3: Roll Tiny White Clay Balls for the Mushroom Dots - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Cut off a small piece of the white and pinch off tiny bits. Roll each one into a little ball between your fingers or on the table. You need five to ten, and they can be a mix of sizes. Do this before you touch the red clay. Once your fingers are stained red, any white clay you handle picks up a pink tint.

Tip

Keep the dots on a clean sheet of paper so they do not pick up lint.

4

Press a Pencil Into the Red Clay Ball for the Cap

2:42
Step 4: Press a Pencil Into the Red Clay Ball for the Cap - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Roll the red clay into a ball. Push the eraser end of a pencil into the center, almost to the bottom but not through it. Wiggle the pencil around a little to widen the hole. Keep going until the opening is wide enough for your thumb or a fingertip. This hole is the start of the mushroom cap.

Tip

If you push through the bottom, roll it back into a ball and start again.

5

Pinch and Smooth the Red Clay Mushroom Cap

3:16
Step 5: Pinch and Smooth the Red Clay Mushroom Cap - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Put your thumb inside and your fingers outside, then pinch and turn, around and around, the same way you make a pinch pot. Stop when the cap is as wide as you want. Smooth the outside with your fingers now, while they are already red. Then thin the bottom edge a bit more and pinch it outward so it flares like a real toadstool.

Tip

Do all the smoothing now. It is much harder once the cap is on the stem.

6

Twist the Red Cap Onto the White Mushroom Stem

4:20
Step 6: Twist the Red Cap Onto the White Mushroom Stem - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Wash your hands well so no red ends up on the white stem. Pick up the stem and push the narrow end up into the hollow of the cap. Twist and squish a little to make sure it is held firmly. Go easy, because pressing too hard will squash the shape you made. It should already look like a little mushroom.

Tip

Hold the mushroom by the cap edges so you do not leave fingerprints on the stem.

7

Press White Dots Onto the Red Toadstool Cap

4:52
Step 7: Press White Dots Onto the Red Toadstool Cap - How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Pick up the tiny white balls one at a time and press them onto the cap. Place them at random, big and small, some near the top and some near the edge, the way spots look in nature. A perfect pattern looks less real. When you are happy, bake the mushroom following the directions on your clay package and let it cool.

Tip

Press each dot gently with a fingertip so it flattens a little and stays put.

How to Make a Clay Bowl on a Pottery Wheel (Beginner's Guide)

Keep going

How to Make a Clay Bowl on a Pottery Wheel (Beginner's Guide)

Products Used

The Checklist

How to Make a Clay Mushroom (Easy Polymer Clay Toadstool)

Tools
3
Materials
3
Steps
7
Video
5 min

Tools we recommend

Your Guide

Merry Maker Studio

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New pottery tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this pottery tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.