How to Make an Origami Turtle (Easy, One Cut)

Paper CraftsEasy11:3510 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make an Origami Turtle (Easy, One Cut)

By Show Me Step by StepPublished

Based on a video by Art for Kids Hub.

An origami turtle is a flat paper turtle with a rounded shell, four little flippers, a head and a tail, all folded from one square. This version needs a single snip with scissors, which makes the front flippers much easier than a pure fold. This tutorial follows Rob from Art for Kids Hub, who folds it with three year old Austin helping press the creases, so it is a good one to do with grandchildren.

How to make an origami turtle: the short version

  • Fold a square into a triangle, then a smaller triangle.
  • Squash both flaps into a square base.
  • Fold the sides to the center and open the top layer.
  • Cut the bottom flap up the middle and fold out the front flippers.
  • Pleat the head, fold out the back feet and pleat the tail.
  • Fold in the side points and flip it over.

Choosing paper

Use square origami paper that is colored on both sides. Rob picks green on both sides, so no white shows on the shell or flippers. A 6 inch square makes a turtle about the size of your palm; a larger 8 or 10 inch sheet is easier for small hands. If you only have printer paper, fold one corner down to the opposite edge to make a triangle and cut off the strip below it. When you open it, you have a square.

Folding with kids

Let the adult set up each fold and the child press it flat. Children love running a finger along a crease, and a sharp crease makes every later step easier. Do the scissors step yourself or with child safety scissors and a hand on theirs. The squash fold in steps 2 and 3 is the trickiest part. Rob opens and redoes it once on camera, which is a good reminder that it is fine to unfold and try again.

Origami words you will see

  • Square base. A small layered diamond made from two squash folds. Many origami animals start here, including the crane.
  • Squash fold. Lift a flap, open its pocket and press it flat into a new shape.
  • Petal fold. Lift one layer while its sides fold in along creases you made earlier.
  • Pleat. A fold down and back up that makes a small step.

Ways to use your turtles

Draw a pattern on the shell with markers, or fold a small one from patterned paper for a baby turtle. Glue one to the front of a birthday card, tape a row along a classroom bulletin board, or fold a family of different sizes for an ocean scene with paper fish. A turtle with a small magnet on the back makes a cheerful fridge decoration.

Common problems

  • The squash fold will not lie flat. Open the flap fully, line the center crease up with the edge below, then press.
  • The flippers are uneven. Cut straight up the center crease and fold both sides to the same angle.
  • White paper shows. Use paper colored on both sides.
  • The legs look too pointy. Fold the tips in, as in the last step, to round them off.

More paper animals

Once you have the turtle, try an origami frog that jumps, a paper cat, or the classic origami crane.

What you'll need

Step-by-Step Guide

10 steps · about 12 minutes.Check off each step as you go and your progress saves automatically.

1

Fold the Origami Paper Into a Small Triangle

2:00
Step 1: Fold the Origami Paper Into a Small Triangle - How to Make an Origami Turtle (Easy, One Cut)

Start with a square of origami paper, colored side down if it has a white side. Fold it in half corner to corner to make a big triangle and press the crease flat. If the corners do not line up, open it and redo it. Then fold that triangle in half again, corner to corner, to make a smaller triangle.

Tip

Run a fingernail along each crease. Sharp folds now make the squash folds much easier.

2

Squash Fold the First Flap of the Origami Turtle

2:48
Step 2: Squash Fold the First Flap of the Origami Turtle - How to Make an Origami Turtle (Easy, One Cut)

Lift the top flap of the small triangle so it stands straight up. Open the pocket and press it down flat so it becomes a square, with the center crease lined up with the fold underneath. This is called a squash fold. Press the new edges down firmly before you move on.

Tip

Folding the flap over and back once first makes it easier to open the pocket.

3

Squash the Second Side Into a Square Base

4:00
Step 3: Squash the Second Side Into a Square Base - How to Make an Origami Turtle (Easy, One Cut)

Flip the paper over and do the same thing on the other side. Lift the flap, open the pocket and squash it flat into a square. When both sides are done, you have a square base: a small diamond with an open end at the bottom and layers on both sides.

Tip

If the two sides do not match, open the second one and line it up with the first.

4

Fold the Turtle Sides to the Center Line

4:24
Step 4: Fold the Turtle Sides to the Center Line - How to Make an Origami Turtle (Easy, One Cut)

Working on the top layer only, fold the right lower edge in so it lines up with the center crease. Do the same with the left edge. It now looks like a kite. Then fold the top point down over those flaps and crease it well. These creases guide the next fold, so press them hard.

Tip

Only fold one side of the model here. The back stays as it is.

5

Open the Top Layer Into a Long Diamond

5:12
Step 5: Open the Top Layer Into a Long Diamond - How to Make an Origami Turtle (Easy, One Cut)

Unfold the flaps from the last step. Lift the bottom point of the top layer up, using the crease you made as a hinge. As it rises, the sides fold in along the creases. Press them down so the top layer becomes a long diamond. This is a petal fold, and it is the tricky part.

Tip

Go slowly and let the creases do the work. Rob shows it twice in the video.

6

Cut the Bottom Flap for the Turtle Front Flippers

6:06
Step 6: Cut the Bottom Flap for the Turtle Front Flippers - How to Make an Origami Turtle (Easy, One Cut)

Take scissors and cut up the middle of the long flap you lifted, along the center crease. Stop where the flap meets the body. That single cut splits the flap into two strips. Those strips become the front flippers. This is the only cut in the whole turtle, so take it slow and keep it straight.

Tip

Let an adult start the cut. A child can finish it with safety scissors.

7

Fold Down the Origami Turtle Front Flippers

6:24
Step 7: Fold Down the Origami Turtle Front Flippers - How to Make an Origami Turtle (Easy, One Cut)

Fold each cut strip down and out to the side, at a slant, so they stick out like front flippers. Press both flat. Try to fold them to the same angle so the turtle looks even. Now you can start to see the turtle shape, with a point above the flippers that will become the head.

Tip

Look at both flippers side by side before you crease. It is easier to match them now.

8

Pleat the Origami Turtle Head

6:48
Step 8: Pleat the Origami Turtle Head - How to Make an Origami Turtle (Easy, One Cut)

Fold the top point down, then fold it back up partway so it sits in a little step. This small zigzag is a pleat, and it makes the head stick out from the shell. Press it down well. Turn the model over and you will see the head poking out from the top.

Tip

A smaller pleat makes a longer head; a bigger pleat makes it stubby.

9

Fold Out the Back Feet of the Origami Turtle

8:00
Step 9: Fold Out the Back Feet of the Origami Turtle - How to Make an Origami Turtle (Easy, One Cut)

Fold in the side points of the front legs so they are not so pointy, then squash them back down. At the bottom, find the two little ends. Fold one out to the side to make a back foot and press hard. Fold the other to the same point so both back feet are the same length.

Tip

Use the front flippers as a guide for how far out to fold the back feet.

10

Pleat the Tail and Finish the Origami Turtle

8:56
Step 10: Pleat the Tail and Finish the Origami Turtle - How to Make an Origami Turtle (Easy, One Cut)

Fold the bottom point up, then back down in a small pleat, like the head but smaller. That is the tail. Turn the turtle over and check the head and tail stick out. Flip it back, fold the two side points in to touch the center line and press. Turn it over and your turtle is done.

Tip

Draw a shell pattern on top with a marker for a finishing touch.

How to Make a Woven Paper Easter Basket

Keep going

How to Make a Woven Paper Easter Basket

Products Used

The Checklist

How to Make an Origami Turtle (Easy, One Cut)

Tools
2
Materials
1
Steps
10
Video
12 min

Tools we recommend

Your Guide

Art for Kids Hub

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New paper crafts tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Related collections

Curated theme pages that include this tutorial.

Weekly Digest

Liked this paper crafts tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.