How to Paint a Gourd to Look Like Raku Pottery

PaintingEasy10:249 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Paint a Gourd to Look Like Raku Pottery

By Show Me Step by StepPublished

Based on a video by Jenn Avery Gourd Art.

A plain dried gourd can pass for a piece of raku pottery with nothing more than black paint and a few jars of shimmer powder. Jenn Avery of Jenn Avery Gourd Art shows the method in her studio: a black base coat, a second coat brushed on in sections, and mica pigments dabbed into that wet paint so they stick and glow. It is forgiving, quick, and it hides a gourd surface that is too scratched or patchy for wood burning.

What raku pottery looks like, and why it works on a gourd

Raku is an old Japanese firing method. The pots come out of the kiln hot and go straight into sawdust or leaves, and the fast cooling leaves random flashes of copper, blue, purple and gold on a dark body. No two pieces match. A gourd has the same round, organic shape as a raku vessel, so a dark base with patchy metallic color fools the eye. Pull up a few photos of real raku before you start and pick three to six colors you like together.

Supplies for painting a gourd

  • A cleaned, dry gourd. Cut, cleaned and sanded if you want a bowl shape. Any drilled holes for a rim go in before you paint.
  • Black acrylic paint. Jenn uses a thick black gesso for its matte finish and good coverage, but any craft acrylic works.
  • Mica pigment powders. Pearl Ex in antique copper, Aztec gold, true blue, blue russet, red russet and duo blue green. A sparkly loose eyeshadow does the same job.
  • Several soft brushes. One per color, so the shades stay clean.
  • A clear UV resistant spray in gloss or matte to seal it.

How to paint a gourd with the faux raku method

Work the second black coat in sections no bigger than your palm. Acrylic dries fast, and the powder only grabs while the paint is tacky. Dab, do not sweep. A dabbing brush leaves soft clouds of color with black showing around them, which is the raku look. Keep each color random in size and placement.

Gloss or matte?

Gloss makes the colors pop in sunlight and looks like a glazed pot. Matte keeps the pearly shimmer but stops the shine from competing with it, and it looks closer to real fired raku. Jenn prefers matte. Seal outside or in a well aired room, in light coats.

Ideas for your painted gourd

  • Add a pine needle rim or coiled edge on a bowl gourd.
  • Paint small egg gourds as a set and group them on a shelf.
  • Try a fall palette of copper, gold and red for a centerpiece.
  • Give one as a gift with a note that it is a gourd, not clay.

Common problems

  • The powder will not stick. The paint dried. Brush a little more black over it and dab again.
  • Colors look muddy. Use a clean brush for each pigment.
  • Too much color, not enough black. Paint black back over a patch. Nothing is ruined.

For a similar dark and shimmer palette on canvas, see how to paint a galaxy. Pick colors that sit well together with mixing acrylic paint colors, try a crackle paint finish on your next piece, or paint a pumpkin for fall. Clean up afterwards with cleaning acrylic paint brushes.

What you'll need

Step-by-Step Guide

9 steps · about 10 minutes.Check off each step as you go and your progress saves automatically.

1

Choose Pearl Ex Pigments for a Raku-Look Gourd

1:02
Step 1: Choose Pearl Ex Pigments for a Raku-Look Gourd - How to Paint a Gourd to Look Like Raku Pottery

Look at a few photos of real raku pottery and note the colors that catch your eye. Coppers, blues, purples and a touch of gold are classic. Jenn picks antique copper, Aztec gold, true blue, blue russet, red russet and duo blue green, plus a sparkly loose eyeshadow she had on hand. Three to six colors is plenty for one gourd.

Tip

Loose powdered eyeshadow with fine shimmer works the same way as mica pigment.

2

Base Coat the Cleaned Gourd Black and Set Out Your Pigments

3:25
Step 2: Base Coat the Cleaned Gourd Black and Set Out Your Pigments - How to Paint a Gourd to Look Like Raku Pottery

Start with a cut, cleaned gourd and give it a full coat of black acrylic paint. Let it dry completely. Drill any holes for a rim before this coat. Then open every pigment jar and set them on paper next to the gourd with a separate soft brush for each. Once the second coat goes on, you will not have time to hunt for lids.

Tip

A thick black gesso covers in one coat and dries to a matte surface.

3

Brush Wet Black Gesso on One Section of the Gourd

3:58
Step 3: Brush Wet Black Gesso on One Section of the Gourd - How to Paint a Gourd to Look Like Raku Pottery

Hold the gourd in one hand and brush a second coat of black onto one area only, about the size of your palm. This wet layer is the glue for the pigments. Acrylic dries quickly, so working in small sections keeps the paint tacky while you add color. You will repeat this coat and color routine around the whole gourd.

Tip

If a section dries before you get to it, brush on a little more black.

4

Dab Antique Copper Pigment Into the Wet Black Paint

4:22
Step 4: Dab Antique Copper Pigment Into the Wet Black Paint - How to Paint a Gourd to Look Like Raku Pottery

Load a soft brush with antique copper pigment and dab it onto the wet black section. Do not brush it around. Short dabs leave a soft cloud of color with black showing at the edges. The powder sticks right to the wet paint, and even a little black on the brush does no harm. Leave some areas black for contrast.

Tip

Tap excess powder off the brush over the jar to waste less pigment.

5

Add Blue Russet and Red Tones to the Gourd With a Clean Brush

5:45
Step 5: Add Blue Russet and Red Tones to the Gourd With a Clean Brush - How to Paint a Gourd to Look Like Raku Pottery

Switch to a fresh brush and dab blue russet next to the copper, then a little red russet. Overlap the edges a bit so the colors melt into each other. Keep the placement random. Raku pottery never has neat bands of color, so odd shapes and uneven patches look more convincing than a pattern.

Tip

A new brush for each color keeps every shade clear instead of muddy.

6

Dab Aztec Gold Pigment on the Next Wet Section of the Gourd

6:35
Step 6: Dab Aztec Gold Pigment on the Next Wet Section of the Gourd - How to Paint a Gourd to Look Like Raku Pottery

Brush black over the next section and dab in Aztec gold while it is wet. Gold reads as the flash of metal you see on fired raku, so small touches go a long way. Add a little true blue beside it. If a patch looks wrong, paint black back over it and try again. This is a very forgiving project.

Tip

Turn the gourd as you go so you always work on the side facing you.

7

Cover the Whole Gourd With Duo Blue Green Pigment

6:50
Step 7: Cover the Whole Gourd With Duo Blue Green Pigment - How to Paint a Gourd to Look Like Raku Pottery

Keep working around the gourd, section by section, adding color as you go. Duo blue green shifts between teal and purple as the light moves, which gives the finish depth. Where a pigment is not sticking, add a touch more black and dab again. Stop when the whole surface is covered and the colors feel balanced, then let it dry.

Tip

Step back and look from a distance. Fill any big plain gaps with a small dab of color.

8

Seal the Painted Gourd With a UV Resistant Clear Coat

8:25
Step 8: Seal the Painted Gourd With a UV Resistant Clear Coat - How to Paint a Gourd to Look Like Raku Pottery

Once the paint is fully dry, seal it so the powder does not rub off. Jenn uses Krylon UV resistant clear coating, which also slows fading. Spray light, even coats outside or in a well aired room and let each one dry. A gloss coat makes the metallic colors shine like a glazed pot in the sun.

Tip

Two light coats work better than one heavy coat, which can run.

9

Compare Gloss and Matte Finishes on the Faux Raku Gourd

9:22
Step 9: Compare Gloss and Matte Finishes on the Faux Raku Gourd - How to Paint a Gourd to Look Like Raku Pottery

Spray a matte coat over the gloss if you want a softer look. The pearly shimmer of the pigments still shows, but the shine no longer competes with it. Jenn prefers matte because it looks closer to real fired raku. Take the gourd into daylight and turn it to see the colors shift.

Tip

Not sure which you like? Seal one test gourd in gloss and another in matte.

How to Paint a Moonlit Lake in Acrylics

Keep going

How to Paint a Moonlit Lake in Acrylics

Products Used

The Checklist

How to Paint a Gourd to Look Like Raku Pottery

Tools
3
Materials
4
Steps
9
Video
10 min

Tools we recommend

Your Guide

Jenn Avery Gourd Art

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New painting tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this painting tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.