How to Do Watercolor Calligraphy

CalligraphyMedium17:0010 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Do Watercolor Calligraphy
Also in:Painting

By Show Me Step by StepPublished

Based on a video by Calligraphy Masters.

Watercolor calligraphy is lettering where the color does half the work. You write with a wet, bright watercolor, then drop more color and water into the letters while they are still wet so they bloom and blend. This tutorial follows Francesco Guerrera, known as Fralligraphy, on the Calligraphy Masters channel. He writes a blackletter word with an automatic pen and liquid Ecoline watercolor, then plays with the color until the piece glows.

How to do watercolor calligraphy: the short version

  • Charge a broad pen with a light liquid watercolor and test it on scrap.
  • Write your word quickly so the letters stay wet.
  • Touch drops of other colors into the wet letters with a fine brush.
  • Blot with tissue or drop in clean water for texture.
  • Add a second line with a brush pen and finish with a few splatters.

Tools you need

Ecoline is a liquid watercolor. It flows like ink but blends like watercolor, which is why it suits this. Any liquid watercolor or thinned tube watercolor works. An automatic pen is a broad-edged dip pen with a folded nib that holds a lot of liquid. A Pilot Parallel pen or a broad nib also works. You will want a fine round brush for dropping color, a flat brush or pipette for loading the pen, and a brush pen for the second line.

Pick the right paper

Francesco uses plain layout paper in the video so you can see the effect, but he strongly suggests watercolor paper. The letters get very wet. Thin paper buckles and the color can run where you do not want it. A smooth, hot press watercolor paper keeps the edges of the letters crisp and still lets the colors move inside them.

Work fast and stay inside the letters

The magic only happens while the letters are wet. Write the word at a steady, quick pace and start dropping color right away. Touch the brush to the letter and let the color flow in. Do not paint. Keep a clean, steady hand and stay inside the strokes, because anything that lands on the white paper will spread. Splatter and outside marks come last, once the letters are set.

Color combinations that work

  • Yellow base with orange and red drops for a warm sunset.
  • Light blue base with violet and teal for a cool, watery look.
  • Pale pink base with magenta and gold for a card or a wedding sign.

Start with the lightest color as the base. Dark drops into light letters bloom nicely. Light into dark barely shows.

Common problems

  • Color will not spread. The letter dried. Rewet it with clean water first.
  • Muddy letters. Too many colors, or colors that mix to brown. Clean the brush between colors and stop sooner.
  • Blobs at the start of strokes. The pen is overloaded. Dab it on scrap before writing.

More lettering to try

New to broad-edge pens? Start with how to use a calligraphy pen. For the second line, see brush pen calligraphy. For basics, read how to learn calligraphy and how to do calligraphy.

What you'll need

Step-by-Step Guide

10 steps · about 17 minutes.Check off each step as you go and your progress saves automatically.

1

Load the Automatic Pen With Watercolor and Test the Strokes

3:05
Step 1: Load the Automatic Pen With Watercolor and Test the Strokes - How to Do Watercolor Calligraphy

Francesco starts with a very light yellow Ecoline for the base color of the letters. He uses a brush to load drops of the watercolor into his automatic pen. Make a few test strokes on a scrap first. The pen holds a lot of color, and the first strokes are very dense. Testing lets the charge settle so the lettering starts clean.

Tip

Choose the lightest color you plan to use as the base. Darker drops go in later.

2

Write the Word in Watercolor Calligraphy With the Automatic Pen

4:08
Step 2: Write the Word in Watercolor Calligraphy With the Automatic Pen - How to Do Watercolor Calligraphy

Write your word. Francesco writes 'color' in blackletter. Every time you recharge the pen, the color starts dense and gets lighter, which already gives a gradient. Work a bit faster than usual. You need the letters to stay wet so the next colors can move inside them. Shapes still matter, so keep the letters as good as you can.

Tip

Write short words or one line at a time so nothing dries before you add color.

3

Drop Purple Watercolor Into the Wet Calligraphy Letters

4:52
Step 3: Drop Purple Watercolor Into the Wet Calligraphy Letters - How to Do Watercolor Calligraphy

Pick up a very thin brush and load it with a second color. Francesco uses purple. Touch the brush to the wet letters and leave a few drops. The color spreads inside the strokes and stays inside the letters, the same way watercolor works. The more color you drop in, the stronger the effect. Work around the whole word.

Tip

Touch, do not paint. Let the water carry the color.

4

Add Green Watercolor Drops Inside the Calligraphy Letters

6:20
Step 4: Add Green Watercolor Drops Inside the Calligraphy Letters - How to Do Watercolor Calligraphy

Clean the brush so you do not mix colors, then load a third color. Francesco adds green here and there. The wetter the paper, the more random and lively the result. Keep a steady hand and stay inside the letters. If you want drops outside, save that for later or do it before you start writing.

Tip

Rinse the brush fully between colors to keep them bright and not muddy.

5

Blot the Watercolor Calligraphy With Tissue for Texture

6:52
Step 5: Blot the Watercolor Calligraphy With Tissue for Texture - How to Do Watercolor Calligraphy

Take a clean piece of tissue or paper towel and press it onto part of a letter. It lifts some of the color and lightens the background tone. You can press firmly to take a lot away or lightly to soften the drops you added. Francesco loves the texture this gives. Always use a clean piece so you do not print old color back on.

Tip

Crumpled tissue gives a mottled pattern. Folded tissue gives a cleaner lift.

6

Drop Clean Water Into the Watercolor Letters for Blooms

8:35
Step 6: Drop Clean Water Into the Watercolor Letters for Blooms - How to Do Watercolor Calligraphy

With a clean brush, drop plain water into the colored letters. Watch what happens. The color pushes out and leaves soft blooms and lighter spots. Orange may fade toward yellow where the water lands. Blot again with paper to stop the process when you like what you see. This is the texture people ask about most.

Tip

Small drops give tight blooms. Bigger drops spread wider and lighten more.

7

Write a Second Line With a Watercolor Brush Pen

11:30
Step 7: Write a Second Line With a Watercolor Brush Pen - How to Do Watercolor Calligraphy

For the second line, Francesco switches to an Ecoline brush pen in green, with purple as a second color. He dips the tip of the brush pen into the liquid Ecoline before writing. The pen lays down a gradient as it runs from the dipped color into its own ink. Write the line under your first word in a looser script.

Tip

A contrasting style, like blackletter over brush script, makes the layout look planned.

8

Add Water Drops to the Watercolor Brush Pen Lettering

12:43
Step 8: Add Water Drops to the Watercolor Brush Pen Lettering - How to Do Watercolor Calligraphy

Treat the brush pen line the same way as the first word. Drop clean water into it and watch the texture come out. The two styles start to look like one piece because the colors, gradients and texture now match. Blot with paper to stop anywhere. Francesco stops when he sees something he likes, before the color washes away.

Tip

Too much water can erase the color. Blot early if a stroke starts to vanish.

9

Add Final Drops of Color to the Watercolor Calligraphy

14:38
Step 9: Add Final Drops of Color to the Watercolor Calligraphy - How to Do Watercolor Calligraphy

Look over the whole layout. Use the fine brush to add a few more drops where a letter needs more color or depth. Francesco adds a touch of black at the very end to give the layout more contrast and depth. Keep these drops small. A little dark goes a long way next to bright colors.

Tip

Step back from the piece before adding more. It is easy to overwork it.

10

Splatter Ink Over the Finished Watercolor Calligraphy

15:25
Step 10: Splatter Ink Over the Finished Watercolor Calligraphy - How to Do Watercolor Calligraphy

For the finishing splatter, load the small brush with plenty of color. Hold it over the paper and blow hard across the bristles. The color sprays out in fine dots. Francesco learned this from a fellow artist. Add splashes here and there, then a few black drops for contrast. Let it dry flat before you move it.

Tip

Cover parts you want clean with scrap paper before you splatter.

How to Make Calligraphy Place Cards - Easy DIY Brush Lettering

Keep going

How to Make Calligraphy Place Cards - Easy DIY Brush Lettering

Products Used

The Checklist

How to Do Watercolor Calligraphy

Tools
5
Materials
3
Steps
10
Video
17 min

Tools we recommend

Your Guide

Calligraphy Masters

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New calligraphy tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this calligraphy tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.