How to Make a Mitten Garland From Dollar Tree Stockings

CraftsEasy11:5010 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make a Mitten Garland From Dollar Tree Stockings

By Show Me Step by StepPublished

Based on a video by The Daily DIYer.

This mitten garland starts as two knit stockings from the Dollar Tree. Shannon from The Daily DIYer cuts each stocking into three tiny mittens, glues the edges, and trims them with the stocking's own faux fur cuff. There is no sewing machine involved, and the whole garland costs a few dollars. Her mom's sweater stocking garland gave her the idea.

How to make a mitten garland: the short version

  • Make a small mitten template from the stocking's cardboard insert.
  • Cut off the fur cuff and turn the stocking inside out.
  • Trace three mittens per stocking, a half inch bigger than the template, and cut them out.
  • Hot glue the edges, turn each mitten right side out and glue fur across the top.
  • Glue a jute loop inside each one and thread them onto a long jute string.

What you need

Two knit holiday stockings make six mittens. Buy more if you want a longer garland. You also need a hot glue gun and glue sticks, sharp scissors, a marker, and twine or ribbon to hang them. Shannon paints plain two-ply jute with white chalk paint because she had no white string. White baker's twine, thin ribbon or yarn all skip the painting step.

Why the half inch matters

You trace about a half inch outside the template. The glue sits in that margin, and the mitten is turned right side out afterward. Without the extra room, the thumb pinches shut and the mitten looks lumpy. Keep the template simple: a rounded top and a short, wide thumb turn out much more easily than a thin one. Trace on the lining side so every marker line ends up hidden.

Glue or sew

Hot glue is quick and holds well on knit. If you sew, a straight stitch around the edge on a machine takes a few minutes per mitten and survives years of packing away. Either way, work on the inside-out pieces so the seam ends up hidden. Low-temperature glue is kinder to fingers when you press the layers together.

Ways to use the mittens

  • Hang the garland across a mantel, a coat rack or a window.
  • Tuck a candy cane or a sprig of greenery into each open cuff.
  • Set one mitten on each plate as a place card, or slip the silverware inside.
  • Hang single mittens on the tree as ornaments.

Shannon's red and white Nordic knit reads as Christmas, but it also works as winter decor through February. Gray or cream knit makes a softer, cabin style version.

Common problems

  • Glue shows on the outside. Run a thinner bead a little in from the edge.
  • The knit frays. Handle the cut pieces gently and glue them soon after cutting.
  • Mittens hang crooked. Glue the loop knot in the center of the back inside the cuff.

More garland ideas: a no-cost Christmas garland from cranberries, a dried orange garland and a ruffled felt garland. Want full-size pieces? Try a sewn Christmas stocking or a fabric gnome.

What you'll need

Step-by-Step Guide

10 steps · about 12 minutes.Check off each step as you go and your progress saves automatically.

1

Draw a Mitten Template on the Stocking Cardboard

1:50
Step 1: Draw a Mitten Template on the Stocking Cardboard - How to Make a Mitten Garland From Dollar Tree Stockings

Pull the cardboard insert out of one stocking. It makes a good stiff template. Draw a small mitten on it with a marker: a rounded top, a short wide thumb and a straight cuff edge. Size it so three mittens fit across the stocking. Cut it out with scissors. Rough curves are fine, because you trace outside the line later anyway.

Tip

Fold the cardboard in half before you draw if you want both sides of the mitten to match.

2

Cut the Faux Fur Cuff Off the Dollar Tree Stocking

2:20
Step 2: Cut the Faux Fur Cuff Off the Dollar Tree Stocking - How to Make a Mitten Garland From Dollar Tree Stockings

Lay the stocking flat. Cut straight across under the white faux fur cuff to take it off. Set the fur aside and do not throw it out. It becomes the trim on every mitten later. With the cuff gone you have the whole knit body of the stocking to cut from, which is enough for three mittens.

Tip

Cut close to the seam so you keep as much fur as you can.

3

Trace Three Mittens on the Inside-Out Stocking

3:17
Step 3: Trace Three Mittens on the Inside-Out Stocking - How to Make a Mitten Garland From Dollar Tree Stockings

Turn the stocking inside out so the plain red lining faces up. Lay the cardboard template near the top and trace around it with the marker, about a half inch wider than the template on every side. Slide the template down and trace two more. Both layers of the stocking stay together, so each tracing gives you a front and a back.

Tip

Marker lines on the inside get hidden when you turn the mittens out.

4

Cut Out the Mitten Pieces Through Both Stocking Layers

3:45
Step 4: Cut Out the Mitten Pieces Through Both Stocking Layers - How to Make a Mitten Garland From Dollar Tree Stockings

Cut along each traced line through both layers of the stocking at once. Hold the layers flat with your other hand so they do not shift. Each cut gives you a matched front and back piece. Repeat the template, trace and cut steps on the second stocking. Two stockings give you six mittens, twelve pieces in all.

Tip

Keep each front and back pair together so the patterns line up.

5

Hot Glue Around the Edge of the Mitten Pieces

5:10
Step 5: Hot Glue Around the Edge of the Mitten Pieces - How to Make a Mitten Garland From Dollar Tree Stockings

Keep the pieces inside out. Run a thin bead of hot glue around the edge of one piece, leaving the straight cuff edge open. Press the matching piece on top, lining up the thumbs. Hold it a few seconds while the glue sets. If you like to sew, stitch around the edge here instead. That is the only difference between the two versions.

Tip

Stop the glue a little short of the cuff edge so the opening stays clean.

6

Turn Each Glued Mitten Right Side Out

5:52
Step 6: Turn Each Glued Mitten Right Side Out - How to Make a Mitten Garland From Dollar Tree Stockings

Once the glue is cool, turn the mitten right side out through the open cuff. Push the thumb out gently with a fingertip or the blunt end of a pencil. The knit pattern now shows on the outside and the glued seam is hidden. Smooth it flat with your hands. Repeat for all six mittens.

Tip

Wait for the glue to cool fully, or the seam can pull apart as you turn it.

7

Glue Faux Fur Trim Across the Top of Each Mitten

6:35
Step 7: Glue Faux Fur Trim Across the Top of Each Mitten - How to Make a Mitten Garland From Dollar Tree Stockings

Cut the saved fur cuff into strips a little wider than the mitten opening. Run a line of hot glue across the top edge of the mitten and press a fur strip over it. Wrap the ends around the back and glue them down. The fur hides the raw cut edge and gives each mitten a cozy, finished look. Leave the cuff open so things can go inside.

Tip

Trim stray fur fibers with scissors once the glue sets.

8

Paint the Jute Twine White for the Garland String

9:10
Step 8: Paint the Jute Twine White for the Garland String - How to Make a Mitten Garland From Dollar Tree Stockings

Lay your mittens out to see how long the garland should be. Cut the main string about double that length. Shannon's came to 60 inches. Then cut a 12 inch piece for each mitten loop. Put on gloves, lay the jute on scrap paper and brush on white chalk paint with a foam brush. Let it dry fully.

Tip

White baker's twine or ribbon skips this step entirely.

9

Hot Glue a Jute Hanging Loop Inside Each Mitten

9:42
Step 9: Hot Glue a Jute Hanging Loop Inside Each Mitten - How to Make a Mitten Garland From Dollar Tree Stockings

Fold a 12 inch piece of painted jute in half and knot the two ends together to make a loop. Put a dab of hot glue on the knot and press it inside the back of the mitten, under the fur cuff. The knot stays hidden and only the loop shows above the fur. Let the glue cool before you hang anything on it.

Tip

Center the knot on the back so the mitten hangs straight.

10

Thread the Mittens Onto the Jute Garland String

10:03
Step 10: Thread the Mittens Onto the Jute Garland String - How to Make a Mitten Garland From Dollar Tree Stockings

Lay the long jute string across your table. Slide each mitten loop onto the string and space the mittens out evenly. The doubled length gives you room to move them around once it is hung. Tie a loop in each end of the string, hang it from hooks or nails, and trim off any extra jute that hangs down.

Tip

Tie each mitten loop around the string once if you do not want them to slide.

How to Make a Twig Star From Willow

Keep going

How to Make a Twig Star From Willow

Products Used

The Checklist

How to Make a Mitten Garland From Dollar Tree Stockings

Tools
4
Materials
4
Steps
10
Video
12 min

Tools we recommend

Your Guide

The Daily DIYer

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New crafts tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Related collections

Curated theme pages that include this tutorial.

Weekly Digest

Liked this crafts tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.