How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

CraftsEasy7:2810 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

By Show Me Step by StepPublished

Based on a video by Dave's Wreaths and Things.

This long, low Christmas centerpiece costs a few dollars and takes about an hour. Dave of Dave's Wreaths and Things builds it from four mini trees from the Dollar Tree, a block of floral foam, one roll of plaid wired ribbon and a handful of red ornaments. He keeps it simple and classic on purpose: green, red and a deconstructed bow, nothing more.

How to make a Christmas centerpiece: the short version

  • Fluff two mini trees and cut the branches off two more.
  • Wrap a piece of floral foam in red felt.
  • Push the whole trees into each end and fill the middle with the cut stems.
  • Pin in ribbon tails and stapled ribbon loops for a bow.
  • Hot glue ornaments in, big ones in the middle, small ones at the ends.

Supplies and what each one does

The mini trees give you the greenery. Two stay whole and make the long tapered ends. The other two turn into loose stems that fill the middle. Dry floral foam (the green kind for silk flowers, not the wet kind for fresh flowers) holds every stem. Red felt hides the foam from the side. Wired ribbon in a 2.5 inch width keeps its loops round. Straight pins hold the ribbon without glue, so you can change it next year. A small stapler is the quickest way to close the ribbon loops.

Sizing it for your table

Four mini trees make a centerpiece about 30 inches long. That suits a standard dining table or a kitchen island. For a round table, use three trees and fan the whole ones out at an angle instead of straight. Keep it under 10 inches tall so people can see each other across the table. It also fits a mantel or the top of a sideboard.

Glue or no glue?

Dave skips glue on the greenery and the big loops. Stems pushed into foam hold well, and the whole piece comes apart if you want to restyle it. If the centerpiece will be moved a lot, or little hands will be near it, add a dab of hot glue to each stem before you push it in. Ornaments do need glue.

Ways to change the look

  • Rustic: burlap ribbon, pinecones and wood bead garland.
  • Elegant: gold and white ribbon with champagne ornaments.
  • Candlelit: leave a gap and set battery candles in glass holders beside it. Never put real flames near artificial greenery.
  • Winter: silver ornaments and a frosted ribbon carry it past New Year.

Common problems

  • The trees wobble. Push the trunk deeper, at least an inch into the foam.
  • Bare foam shows. Add short stems on the sides, angled down.
  • The bow looks flat. Pinch each loop round before you pin it.
  • Ornaments fall off. Glue them to a branch, not to the needles alone.

Want a matching door piece? Make a Christmas wreath or a Christmas garland in the same ribbon. If you prefer a full tied bow, see how to make a bow for a wreath. For autumn, try a Thanksgiving centerpiece with the same foam method.

What you'll need

Step-by-Step Guide

10 steps · about 7 minutes.Check off each step as you go and your progress saves automatically.

1

Gather Supplies for a Dollar Tree Christmas Centerpiece

1:36
Step 1: Gather Supplies for a Dollar Tree Christmas Centerpiece - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Lay everything out before you start. You need four mini artificial Christmas trees, a block of dry green floral foam, a 2.5 inch wired ribbon, red ornaments in a few sizes, and a scrap of red felt. Add straight pins, a stapler, scissors, a ruler, wire cutters and a hot glue gun. Most of it comes from the dollar store, so the whole piece stays cheap.

Tip

Pick ornaments in two or three sizes. Mixed sizes look fuller than a matching set.

2

Fluff Out Two Mini Christmas Trees for the Centerpiece

1:56
Step 2: Fluff Out Two Mini Christmas Trees for the Centerpiece - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Take two of the mini trees out of the box and skip the stands. Bend each branch out and away from the trunk, then spread the tips so they look full. Do not take these two apart. They become the long, tapered ends of your centerpiece, so the fuller they are now, the less filling you need later.

Tip

Fluff from the trunk out to the tips, one branch at a time.

3

Cut the Branch Stems Off Two More Mini Christmas Trees

2:12
Step 3: Cut the Branch Stems Off Two More Mini Christmas Trees - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Take the other two mini trees and cut each branch off at the trunk with wire cutters. Cut at different points so you end up with stems of different lengths. Short ones fill the top, longer ones go on the sides. Fluff each stem as you go and drop them in a tray so they are ready to use.

Tip

Use wire cutters, not your good scissors. The stems have wire inside.

4

Wrap the Floral Foam Block in Red Felt

2:28
Step 4: Wrap the Floral Foam Block in Red Felt - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Cut a small block from the green floral foam, about the size of your palm. Cut a piece of red felt a little bigger than the bottom. Glue the foam onto the felt, then fold the felt up the sides like wrapping a present and glue it down. The felt hides the foam and protects your table.

Tip

Keep the top of the foam bare. That is where the stems go in.

5

Push the Whole Mini Trees Into the Ends of the Floral Foam

2:56
Step 5: Push the Whole Mini Trees Into the Ends of the Floral Foam - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Push the trunk of one fluffed tree straight into one short end of the foam block. Push the second tree into the opposite end, so the two point away from each other. Then fluff the branches again so they cover the foam and look full. You now have the long shape of the centerpiece.

Tip

Push each trunk in at least an inch so the trees do not wobble.

6

Fill the Centerpiece Base With the Cut Greenery Stems

3:14
Step 6: Fill the Centerpiece Base With the Cut Greenery Stems - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Hold the base steady and push the cut stems into the top and sides of the foam. Angle the side stems down a little so they hide the felt. Work around until no foam shows from any side. Dave skips glue here so he can restyle it later. Add a dab of hot glue on each stem if you want it permanent.

Tip

Turn the piece around often. Both sides will be seen on a table.

7

Fold and Staple Ribbon Into Teardrop Loops

3:56
Step 7: Fold and Staple Ribbon Into Teardrop Loops - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Measure and cut six pieces of wired ribbon, 8 inches each. Fold one piece in half so the two ends meet, and staple the ends together. You get a teardrop shaped loop. Make six. These loops are the pieces of a deconstructed bow, so you never have to tie a bow at all.

Tip

A hot glue dot works in place of the staple if you do not have a stapler.

8

Pin Dovetailed Ribbon Tails Into the Centerpiece Foam

4:38
Step 8: Pin Dovetailed Ribbon Tails Into the Centerpiece Foam - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Cut two longer lengths of ribbon for tails. Fold one end of each in half and cut on a slant to make a dovetail. Lay one tail along each side of the centerpiece, with the dovetail end out. Push a straight pin through the other end and into the foam to hold it. The tails stretch the bow along the greenery.

Tip

Pins let you move a tail if it does not sit right.

9

Pin Ribbon Loops Into a Deconstructed Bow on the Centerpiece

5:06
Step 9: Pin Ribbon Loops Into a Deconstructed Bow on the Centerpiece - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Pin two teardrop loops on each side of the center, then two in the middle. Point the loops out so they look like one large bow. Dave then cut a few shorter loops, stapled them the same way and hot glued them near the ends of the greenery. Turn the piece around and check both sides look even.

Tip

Pinch each loop round before you pin it so the bow does not look flat.

10

Hot Glue Red Ornaments Into the Christmas Centerpiece

6:08
Step 10: Hot Glue Red Ornaments Into the Christmas Centerpiece - How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Hot glue the large ornaments in the center around the bow. Then glue the smaller ones out toward the ends. Tuck them into the greenery so they look nestled, not stuck on top. Stop before it looks crowded; Dave had four left over. Set it on your table, mantel or island and enjoy it.

Tip

Shatterproof ornaments are safer if pets or grandchildren are around.

How to Make Felt Pasta (6 Shapes)

Keep going

How to Make Felt Pasta (6 Shapes)

Products Used

The Checklist

How to Make a Christmas Centerpiece (Easy Dollar Tree DIY)

Tools
5
Materials
7
Steps
10
Video
7 min

Tools we recommend

Your Guide

Dave's Wreaths and Things

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New crafts tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Related collections

Curated theme pages that include this tutorial.

Weekly Digest

Liked this crafts tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.