How to Make a Felt Mermaid (Needle Felted)

Other CraftsMedium19:1210 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Make a Felt Mermaid (Needle Felted)

By Show Me Step by StepPublished

Based on a video by SnowflakeForest Felting.

A needle felted mermaid is a small, soft figure made from loose wool and a barbed needle. No sewing machine and no pattern. This tutorial follows SnowflakeForest Felting, who makes a 4 inch mermaid with white hair, a blue and purple tail, a pearl belly button and a beaded crown. She is sized as a newborn photo prop, but she works as a window hanger or a tree ornament too.

How to make a felt mermaid: the short version

  • Felt a small firm ball for the head, leaving a loose tuft.
  • Felt an hourglass body and join the head with that tuft.
  • Cover her in a skin tone and add two rolled arms.
  • Blend tail colors, wrap the lower body and shape the fins.
  • Add shimmer, hair, a pearl and a beaded crown.

Wool, needles and a pad

Use cheap core wool (batting) for the inside of the head and body. It felts fast and holds a firm shape. Save the colored roving for the outside. Roving has its fibers running one way, so it makes much better hair than batting, where the fibers point in every direction.

A coarse needle (36 gauge) shapes the core quickly. A finer one (38 to 40) smooths the surface and works the thin fins without leaving big holes. A thick foam pad protects your table and your needle tips. Angelina or another sparkle fiber gives the tail its shimmer.

Keep your fingers safe

Felting needles are very sharp and barbed, and they break if you bend them. Stab straight in and straight out, at the same angle you went in. Keep the hand holding the wool away from the spot you are working, and use the pad, not your palm. Leather finger guards help on tiny parts like hands and fins. Keep needles away from young children; they can help choose colors and blend the tail wool instead.

Getting the proportions right

For a 4 inch mermaid, the head is a bit under an inch, closer to half an inch. Make the head first and keep it next to the body as you work, so you can compare. The arms need to be the same length, so felt them side by side. Leave the shoulder ends of the arms loose and fluffy. Loose fibers felt into the body far better than a firm, finished end.

How firm is firm enough?

Squeeze the piece. If it springs back and does not dent, it is done. If it feels squashy, keep stabbing. Firm parts join more cleanly, and a firm figure keeps its shape on a shelf for years. Fins take the longest because they are thin, so flip them often and be patient.

Common problems

  • Lumpy surface. Lay a wisp of wool over the dip and felt it in with a fine needle.
  • Head wobbles. Spread more wool over the neck and shoulders and keep stabbing until it feels solid.
  • Fibers poke through the back. Twist them around the needle tip and felt them back in.
  • Broken needle. You stabbed at an angle. Go straight in and out.

More felting to try

New to the needle? Start with how to needle felt, then try a small felted animal. For sewn felt, the felt owl ornament is a good next project, and there are more ideas in how to make Christmas ornaments.

What you'll need

Step-by-Step Guide

10 steps · about 19 minutes.Check off each step as you go and your progress saves automatically.

1

Felt a Wool Ball for the Mermaid's Head

2:20
Step 1: Felt a Wool Ball for the Mermaid's Head - How to Make a Felt Mermaid (Needle Felted)

Pull off a small piece of bone colored core wool. Roll it loosely and start stabbing it on the foam pad, turning it as you go. Keep working until you have a firm, round ball a bit under an inch across. Hold back a little loose wool at one side. That tuft becomes the neck and is how the head joins the body later.

Tip

If a dip appears, wrap a wisp of wool around the ball and felt it in.

2

Shape the Mermaid Body Into an Hourglass

4:22
Step 2: Shape the Mermaid Body Into an Hourglass - How to Make a Felt Mermaid (Needle Felted)

Take a larger piece of core wool for the body. Felt the shoulders first, then slim it down toward the tummy. Wrap more wool around from back to front for the hips and the top of the tail. Bring the bottom down to a soft point. Keep stabbing the waist until the body has a clear hourglass curve and feels as firm as you can make it.

Tip

Set the head beside the body while you work so you keep them in proportion.

3

Felt the Head Onto the Mermaid Body

5:06
Step 3: Felt the Head Onto the Mermaid Body - How to Make a Felt Mermaid (Needle Felted)

Spread the loose neck tuft out as wide as you can over the top of the body. Pull off any extra, but leave plenty, because that wool is what holds the head on. Felt the tuft down into the shoulders. Add more wool if the shoulders look narrow. Then cover the face, back and tummy in a peachy skin tone, down to where the tail starts, and felt it smooth.

Tip

Wiggle the head gently. If it moves, keep felting around the neck.

4

Roll and Felt the Mermaid's Arms and Hands

7:00
Step 4: Roll and Felt the Mermaid's Arms and Hands - How to Make a Felt Mermaid (Needle Felted)

Roll a thin strip of skin-tone wool between your palms for an arm. Add a tiny flat piece at one end for the hand. Felt it on the pad, rolling the arm as you go so it stays round, and flipping the hand back and forth so it stays flat. Make a second arm the same size. Leave the shoulder end of each arm loose and fluffy.

Tip

Lay both arms side by side to check they match before attaching them.

5

Attach the Arms at the Mermaid's Shoulders

8:20
Step 5: Attach the Arms at the Mermaid's Shoulders - How to Make a Felt Mermaid (Needle Felted)

Trim any stray fibers off the hands with small scissors. Spread the loose end of one arm around the shoulder and felt it in, then do the other side. To make the arms look like part of her body, wrap a little more skin-tone wool over each shoulder and felt it down. Add a small wisp under each armpit and smooth it all in.

Tip

Stab shallow around the arms so the needle does not come out the other side.

6

Blend the Roving Colors for the Mermaid Tail

9:48
Step 6: Blend the Roving Colors for the Mermaid Tail - How to Make a Felt Mermaid (Needle Felted)

Pick the colors you want for the tail. SnowflakeForest Felting uses blues and purples with a touch of pink. Pull a little of each color apart with your fingers and layer the fibers together. Keep pulling and stacking until they mix. A few pulls gives streaky color. Many pulls gives a soft, even blend. Make enough to cover the hips and both fins.

Tip

Blending is a good job for little helpers who are too young for the needle.

7

Wrap and Felt the Mermaid Tail

11:10
Step 7: Wrap and Felt the Mermaid Tail - How to Make a Felt Mermaid (Needle Felted)

Wrap the blended wool around the lower half of the body and felt it on. Save some for the bottom of the tail. Pull the rest out into a long tail and shape the fins however you like. Around the hips, felt the top edge into a V so the tail looks like it starts at a point. Keep stabbing until the tail and fins form one firm piece.

Tip

Fins are thin and slow to felt. Flip them often and use a finer needle.

8

Shape the Mermaid Tail Fins and Add Shimmer

13:20
Step 8: Shape the Mermaid Tail Fins and Add Shimmer - How to Make a Felt Mermaid (Needle Felted)

Trim the tail with scissors so the edges look smooth and rounded. Felt a solid color band around the top of the waist so it stands out a little from the tail. Twist a thin strand of shimmer fiber, felt it at the base of a fin and curve it along the edge to the tip. Repeat on the other fin, and felt down any ends that poke through.

Tip

Twist the shimmer tightly first. A loose strand looks fuzzy instead of shiny.

9

Felt White Wool Hair Onto the Mermaid

14:30
Step 9: Felt White Wool Hair Onto the Mermaid - How to Make a Felt Mermaid (Needle Felted)

Hair needs only a little felting. Take a lock of roving and twist it gently. Felt one end to the back of the head, then twist it down her back and felt it in a few spots so it stays. Trim it if it is too long and give the end a firm twist. Add a piece on the other side, make a side part, then fill in along the sides.

Tip

Roving makes smoother hair than batting because its fibers all run one way.

10

Add a Pearl Belly Button and Beaded Crown to the Mermaid

17:15
Step 10: Add a Pearl Belly Button and Beaded Crown to the Mermaid - How to Make a Felt Mermaid (Needle Felted)

Thread a needle and sew a small pearl into the V at the top of the tail. Knot it, trim the ends and felt them in. Wrap a twist of skin-tone wool around the pearl to hold it. For the crown, thread a few beads, tie them into a loop about the size of her head, and felt the thread ends into her hair under a wisp of hair wool.

Tip

To hang her, push fishing line through the top of her head and knot the end.

How to Make a Bath Bomb (Beginner Recipe + Molding Tips)

Keep going

How to Make a Bath Bomb (Beginner Recipe + Molding Tips)

Products Used

The Checklist

How to Make a Felt Mermaid (Needle Felted)

Tools
6
Materials
9
Steps
10
Video
19 min

Tools we recommend

Your Guide

SnowflakeForest Felting

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New other crafts tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this other crafts tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.