How to Do Bounce Lettering With Brush Pens

CalligraphyMedium11:599 stepsPart of Crafting for BeginnersBrowse more →
The finished result: How to Do Bounce Lettering With Brush Pens

By Show Me Step by StepPublished

Based on a video by kellycreates.

Bounce lettering is brush script where the letters hop up and down instead of sitting in a tidy row. It looks relaxed and playful, which is why you see it on cards, chalkboards and party signs. Kelly from Kelly Creates teaches it by writing each word twice, once in her regular brush script and once bounced, so you can see exactly which strokes move and which stay put.

The idea is simple. Regular brush lettering keeps every letter between the same guidelines. Bounce lettering breaks those lines on purpose, letting some strokes drop below the baseline or rise higher, while the thick and thin strokes stay exactly as they were.

How to do bounce lettering: the rules in short

  • Learn regular brush script first. Bounce is a variation, not a new alphabet.
  • Bounce some strokes, never all of them.
  • Keep vowels and ovals on the baseline while you learn.
  • Bounce the second stroke of a letter, not its oval.
  • Make exit strokes narrower and carry them up to where the next letter starts.
  • Keep your thick downstrokes and thin upstrokes the same as always.

Pens and paper

Kelly uses four brush pens in the video: Kuretake Zig Brushables, Tombow Dual Brush Pens, Marvy Le Plume II and Sakura Koi coloring brush pens. A large, flexible tip like the Tombow makes the thick and thin contrast easy to see. The Koi gives slightly thinner downstrokes and is a good middle ground. Use smooth paper: a Rhodia pad, a marker pad or a good laser printer paper. Rough copy paper frays brush tips fast.

Why guidelines matter more, not less

It sounds backward, but you need lined paper to bounce well. You can only break the baseline on purpose if you can see where it is. Print a sheet with a baseline, waistline and ascender line, or rule your own in pencil. Once the bounce feels natural, you can drop the lines.

Pick a bounce pattern

A good first pattern is to bounce every downstroke that ends a letter, like the second leg of an h or n, and leave loops alone. Kelly keeps the ascender loops of h and k ending on the baseline, and drops the strokes that follow. Once you see a pattern, the word looks planned instead of messy. Write the same word three or four ways and keep the one you like.

Common problems

  • Letters do not connect. Your exit stroke stopped too low. Carry it up to where the next letter begins.
  • Misshapen ovals. You dragged an oval below the line. Keep the oval on the baseline and bounce the stroke after it.
  • It looks chaotic. Too many bounces. Pick two or three letters per word.
  • Thin, wobbly downstrokes. Hold the pen further back and at a lower angle, and press harder on the way down.

Practice ideas

Warm up with drills: compound curves, ovals and underturns. Then write short words with easy bounce letters, like hello, thanks, believe and happy. Holiday tags and place cards are a good low-pressure place to try it on real projects.

Keep lettering

New to brush script? Start with brush pen calligraphy and how to use a calligraphy pen. No brush pen yet? Try faux calligraphy with any marker. When you are ready to use it, letter some calligraphy place cards.

What you'll need

Step-by-Step Guide

9 steps · about 12 minutes.Check off each step as you go and your progress saves automatically.

1

Write a Word in Regular Brush Script on the Baseline Before Bounce Lettering

1:00
Step 1: Write a Word in Regular Brush Script on the Baseline Before Bounce Lettering - How to Do Bounce Lettering With Brush Pens

Start with a short word in your normal brush script so you have something to compare against. Kelly writes hi on a lined practice sheet. Every letter sits on the bottom guideline, called the baseline. Downstrokes are thick and upstrokes are thin. Bounce lettering keeps those thicks and thins exactly the same. The only thing that changes is where some strokes land in relation to the lines.

Tip

Use evenly spaced guidelines. You need to see the baseline clearly to break it on purpose.

2

Drop the Second Stroke of the h Below the Baseline for Bounce Lettering

1:35
Step 2: Drop the Second Stroke of the h Below the Baseline for Bounce Lettering - How to Do Bounce Lettering With Brush Pens

Write the word again, this time with a bounce. Keep the h ascender loop the same. Then bring the second stroke of the h down past the baseline before you exit. That one dropped stroke is what makes the letters look like they are bouncing. Put the two versions side by side and you can see the difference straight away.

Tip

Bounce the stroke that ends a letter, like the second leg of an h, m or n.

3

Write a Bouncy Hello With the Vowels Kept on the Baseline

3:25
Step 3: Write a Bouncy Hello With the Vowels Kept on the Baseline - How to Do Bounce Lettering With Brush Pens

Try a longer word like hello. Write it in regular script first, then bounced underneath. While you are learning, keep the vowels, e and o, sitting on the baseline. Move the l strokes instead. Drop one below the line and make the next a little higher or smaller. This is where your own judgment and style come in, so try it a few ways.

Tip

Keeping vowels on the line gives the word an anchor, so it still reads as one word.

4

Narrow the Exit Strokes on Your Bounce Lettering

4:05
Step 4: Narrow the Exit Strokes on Your Bounce Lettering - How to Do Bounce Lettering With Brush Pens

Look at how each letter leaves for the next one. In regular script, the exit stroke of an h swings out wide and open. In bounce lettering, Kelly makes it tighter, coming up at a sharper angle. Narrow exits keep the letters close together even when they move up and down. Some people find them trickier at first, and some find them easier.

Tip

Write a regular h and a bouncy h next to each other and compare the exits.

5

Hold the Brush Pen Far Back on the Barrel for Bounce Lettering

4:55
Step 5: Hold the Brush Pen Far Back on the Barrel for Bounce Lettering - How to Do Bounce Lettering With Brush Pens

Your grip affects every stroke. Kelly switches to a Sakura Koi brush pen here and shows where she holds it: well back on the barrel, not near the tip. That lets the pen lie at a low angle so the side of the brush makes the thick downstrokes. Gripping close to the tip makes the pen stand upright and your strokes come out thin and shaky.

Tip

Relax your hand. A tight grip makes the curves wobble.

6

Bounce the Second Stroke of the a, Not the Oval

6:26
Step 6: Bounce the Second Stroke of the a, Not the Oval - How to Do Bounce Lettering With Brush Pens

Letters with an oval, like a, d and g, need care. If you drag the oval below the baseline it looks misshapen. Instead, write the oval sitting on the line as usual. Then bounce the second part of the letter, the compound curve that follows, below the baseline. The letter still reads clearly, and you still get the bounce.

Tip

This same rule works for o, q and the bowl of a d.

7

Bounce the n and Keep the k Loop in the Bounce Lettering Word Thanks

7:35
Step 7: Bounce the n and Keep the k Loop in the Bounce Lettering Word Thanks - How to Do Bounce Lettering With Brush Pens

Write thanks to put it all together. Bounce the t below the baseline. Make a bigger h loop that stops on the line, then drop its second stroke. Keep the a oval on the line and bounce its tail. Drop the second stroke of the n. For the k, keep the loop the same as the h so the word looks consistent, and stop it on the baseline.

Tip

Carry each exit stroke right up to where the next letter starts, or they will not connect.

8

Try Two Ways to Bounce the s in Bounce Lettering

8:26
Step 8: Try Two Ways to Bounce the s in Bounce Lettering - How to Do Bounce Lettering With Brush Pens

The s is an awkward letter to bounce. Kelly shows two options. Drop the s below the baseline and exit with a loop, or use a simpler s shape and raise it higher than the letters around it. Either works. Practise both at the end of a word and pick the one that looks better with your style.

Tip

If one letter keeps fighting you, swap to a simpler form of it. Nobody will mind.

9

Practice Bounce Lettering Drills on a Printed Worksheet

9:05
Step 9: Practice Bounce Lettering Drills on a Printed Worksheet - How to Do Bounce Lettering With Brush Pens

The fastest way to get comfortable is drills. Trace rows of the basic strokes: compound curves, ovals, reverse ovals, upstrokes and downstrokes. Use a big brush pen like a Tombow. When these feel easy, bouncy letters get much easier too. Then practise whole letters, and finish with words like hello, thanks and believe.

Tip

Slide a sheet of tracing paper over a printed worksheet so you can reuse it many times.

How to Draw Graffiti Letters

Keep going

How to Draw Graffiti Letters

10 steps · about 12 minutes

Products Used

The Checklist

How to Do Bounce Lettering With Brush Pens

Tools
2
Materials
1
Steps
9
Video
12 min

Tools we recommend

Your Guide

kellycreates

As an Amazon Associate we earn from qualifying purchases. Links on this page may be affiliate links - clicking them and buying doesn't change your price, but helps support Show Me Step by Step.

Tags

Sunday How-To

New calligraphy tutorials, every Sunday

One short email with the week's best step-by-step guides. Free, no spam, unsubscribe anytime.

Did this work for you?

What's next

Weekly Digest

Liked this calligraphy tutorial?

Pick the categories you want to hear about. Weekly digest of new step-by-step tutorials. No spam, easy unsubscribe.

Send me tutorials about

We only email about new tutorials. Easy unsubscribe anytime.