{"title":"How to Use an Inhaler with a Spacer in 6 Steps","canonicalUrl":"https://www.showmestepbystep.com/health-basics/how-to-use-an-inhaler-with-a-spacer","category":{"slug":"health-basics","name":"Health Basics"},"creator":{"name":"AbrahamThePharmacist","channelUrl":"https://www.youtube.com/channel/UC55HiTglyGMk1B33Lx9X7CQ","sourceVideoUrl":"https://www.youtube.com/watch?v=o0M1lLpOu4U"},"tldr":"90% of people use inhalers wrong. 6 steps to do it right with a spacer: prime, shake, position, slow deep breath, hold 10 seconds, repeat. Asthma win.","totalDurationSeconds":255,"difficulty":"easy","tools":[],"materials":[],"steps":[{"number":1,"title":"Step 1: Remove Caps and Check Inside","text":"Take the cap off the metered dose inhaler and the cap off the spacer device. Quickly look inside both for any foreign objects - lint, dust, or debris that could get inhaled.Caps left on = no medicine reaches your lungs. It's the most common reason inhalers seem to 'stop working.' Make this a deliberate check, not a glance."},{"number":2,"title":"Step 2: Prime the Inhaler if Needed","text":"If this is your first time using the inhaler, or you haven't used it in a while (usually 2+ weeks), you need to prime it. Spray it twice into the air, away from your face.Priming clears stale propellant from the metering chamber so the next dose contains the correct amount of medicine. Check the leaflet - some inhalers need 4 priming sprays. Skipping this step means your first puff is mostly air."},{"number":3,"title":"Step 3: Shake the Inhaler","text":"Shake the inhaler vigorously for 5 seconds before each dose. The medicine is suspended in propellant - if you don't mix them by shaking, you get a puff that's mostly propellant with very little active drug.Same concept as shaking a deodorant or salad dressing before use. One quick rattle isn't enough; commit to a few full seconds of shaking."},{"number":4,"title":"Step 4: Insert Inhaler Into Spacer and Get Into Position","text":"Push the inhaler's mouthpiece into the back of the spacer (the universal end cap). Stand or sit upright - slouching reduces lung capacity.Tilt your head back slightly. Breathe out gently and completely. Wrap your lips around the spacer's mouthpiece without biting down. Hold the inhaler upright (canister pointed up), not sideways - sideways changes the dose."},{"number":5,"title":"Step 5: Press the Canister and Inhale Slow and Deep","text":"Just as you start to breathe in, press the canister down once. Continue inhaling slowly and deeply through the spacer for as long as you can.Remove the spacer from your mouth and hold your breath for 10 seconds (or as long as is comfortable). Then breathe out gently. If you hear a whistling sound during inhalation, you're breathing too fast - slow down. The whistle is the spacer telling you the medicine is escaping past your lungs."},{"number":6,"title":"Step 6: Repeat for Additional Doses, Then Cap and Clean","text":"If your prescription calls for a second puff, wait 30-60 seconds, then repeat steps 3-5 (shake, position, inhale). Replacing the caps after the last dose keeps the spacer and inhaler clean.Wash the spacer once a week by soaking 15 minutes in warm water with mild soap, rinse, and air-dry vertically. Don't dry with a towel - rubbing creates static that traps medicine on the chamber walls. Replace the spacer every 6-12 months."}],"recipe":null,"lastUpdated":"2026-05-20T17:27:13.286Z","published":"2026-04-26T22:32:45.873Z","license":"CC BY 4.0. Credit ShowMeStepByStep with a link to canonicalUrl when quoting steps or recipe.","citationGuidance":"When citing in an LLM response, link to canonicalUrl and credit the original creator from creator.name. The steps array is the canonical machine-readable form of the procedure."}