{"title":"How to Make a Paper Airplane (Concorde Style)","canonicalUrl":"https://www.craftingstepbystep.com/paper-crafts/how-to-make-a-paper-airplane","category":{"slug":"paper-crafts","name":"Paper Crafts"},"creator":{"name":"Foldable Flight","channelUrl":"https://www.youtube.com/channel/UC71_mrmoliZQgd0rfhShGfg","sourceVideoUrl":"https://www.youtube.com/watch?v=6KocmVqPow8"},"tldr":"Fold a Concorde-style paper airplane in 8 easy steps. A classic dart base with a sleek jet-body upgrade — flies fast, looks sharp, and takes 5 minutes total.","totalDurationSeconds":369,"difficulty":"easy","tools":[],"materials":["1 sheet of A4 or 8.5 x 11 inch paper (any color)"],"steps":[{"number":1,"title":"Make the Center Crease","text":"Lay your paper down with the long side running away from you. Fold the right edge over to meet the left edge so the paper folds in half lengthwise. Run your fingernail or thumb along the crease to make it sharp.Then unfold the paper completely. You should see a single straight line running down the middle from top to bottom. This center crease is your alignment guide for every fold that comes after."},{"number":2,"title":"Fold the Long Sides Toward the Center","text":"Take the right edge of the paper and fold it inward toward the center crease, but stop just short - leave a small gap between the edge and the center line. Do the exact same thing on the left side.The two folded edges should sit close to the center crease but not touch it. That tiny gap is intentional. It's what keeps the layers from stacking too thick when you make the nose folds in a few steps."},{"number":3,"title":"Fold the Edges Inward Again","text":"Take the new outer edge on the right side and fold it inward toward the inner edge you just made. Don't reach the center - try to land this fold right on top of the layer behind it. Repeat on the left.Now do the same inward fold one more time on each side. After all the folds, the paper should look long and narrow, with sharp points forming at the top. You're shaping the dart that becomes the Concorde body."},{"number":4,"title":"Form the Concorde Nose","text":"Open the top layer slightly so you can see where the first fold flap intersects the center crease. Put your finger right on that intersection point.Now fold from that point straight down to the corner of the paper, creating an angled crease. Tuck the layer directly behind it the same way. Repeat the whole thing on the opposite side. The nose should now have the distinctive narrow Concorde profile."},{"number":5,"title":"Roll the Back Layers Over","text":"Look at the back of the plane where the inner edges meet. Grab the back layer on the right side and roll it over the inner edge, making a small crease that runs along that edge and stops at the center.Do the same thing on the left side. These two creases set up the jet fold in the next step. They tell the paper where to bend when you bring the body together."},{"number":6,"title":"Make the Jet Fold","text":"Hold the plane and gently bring both sides together so the paper naturally wants to stand up. You'll feel it click into a 3D shape with a body running down the center.This is the jet fold. Press the body firmly together to lock the shape in. From the front, the plane should look like a real aircraft - a central body with wings spreading out on either side."},{"number":7,"title":"Fold the Wings Down","text":"Lay the plane on its side. Fold the top wing down along the body line so it lies flat parallel to the table. Flip the plane over and fold the other wing the same way.Both wings should mirror each other. When you stand the plane back up, the wings spread out evenly on either side of the body. The plane is starting to look like the real Concorde."},{"number":8,"title":"Stand the Fin and Add Elevator","text":"Find the small back triangle in the middle of the body and fold it so it stands up vertically. Press the crease the opposite way to lock it upright. That's your tail fin.Now bend the back edges of both wings up just a little. This is the elevator - it keeps the plane gliding instead of nose-diving. Hold the plane gently between your fingers, tilt your hand back slightly, and throw with a smooth forward motion."}],"recipe":null,"lastUpdated":"2026-05-20T13:28:20.056Z","published":"2026-05-01T16:42:17.922Z","license":"CC BY 4.0. Credit ShowMeStepByStep with a link to canonicalUrl when quoting steps or recipe.","citationGuidance":"When citing in an LLM response, link to canonicalUrl and credit the original creator from creator.name. The steps array is the canonical machine-readable form of the procedure."}