{"title":"How to Make a 3D Card (Paper Spring Pop-Up Birthday Card)","canonicalUrl":"https://www.craftingstepbystep.com/card-making/how-to-make-a-3d-card","category":{"slug":"card-making","name":"Card Making"},"creator":{"name":"Natalia's Toolbox","channelUrl":"https://www.youtube.com/channel/UCslOmoH68PHSCuSCEAkfXTQ","sourceVideoUrl":"https://www.youtube.com/watch?v=XLAmxIOM3WQ"},"tldr":"Make a 3D pop-up birthday card using accordion paper springs and floating acetate figures. Step-by-step with measurements, photos, and supply list.","totalDurationSeconds":353,"difficulty":"easy","tools":["paper trimmer or ruler + craft knife","scoring board or bone folder","scissors","glue"],"materials":["cardstock (multiple colors)","patterned paper","decorative stickers / images for the floating elements","acetate or vellum (optional)","sentiment stamp or sticker"],"steps":[{"number":1,"title":"Step 1: Gather Your Supplies","text":"Lay out two pieces of cardstock in contrasting colors, a ruler, a pencil, scissors, a craft knife, and a glue stick. Grab a sheet of acetate if you want figures that look like they float inside the card. Pick paper that bends without cracking, since this card lives or dies on clean folds.A self-healing cutting mat keeps your craft knife from scoring the table. Have your decorations or stamped images ready before you start so you can move straight from cutting into assembly without hunting for supplies."},{"number":2,"title":"Step 2: Score the Card Base","text":"Fold both pieces of cardstock in half. Take the darker sheet and measure seven centimeters out from the center fold on each side, then mark the same points on the opposite edge. Lay your ruler on the markings and bend the paper over it to create two fresh score lines.Push your fingers into the middle fold and pop the paper into a W shape so the card collapses cleanly. That gatefold geometry is what lets the pop-up springs sit hidden inside. Keep the card folded flat for the next round of measuring."},{"number":3,"title":"Step 3: Cut the Window Opening","text":"With the card still folded, measure one and a half centimeters in from the top and bottom edges on each side. Mark the points, then draw lines from the center fold straight out to the edge. Cut along those lines with scissors to open up the flap slots.Switch to a craft knife and ruler to slice the center fold between the cuts. That carves out the rectangular window where the accordion strips will sit. Go slow on this part. Crooked edges show through the finished card more than you would expect."},{"number":4,"title":"Step 4: Fold the Accordion Paper Springs","text":"Cut a strip of contrasting cardstock for the first spring. Starting from one end, mark at 1, 8, 9, 16, 17, 24, 25, and 32 centimeters, then repeat the marks along the opposite edge. Lay your ruler across each pair and bend the paper firmly over it.Fold the small flap inward, the next gap inward, then reverse the next fold backward and bend the small tab backward too. You end up with a stretchy W-shaped paper spring. Repeat for a second strip in the same color so the two pop-up arms match."},{"number":5,"title":"Step 5: Cut Figures and Mount Them on Acetate","text":"Now make the figures that will float on your springs. Cut small shapes from leftover cardstock such as balloons, stars, or birthday hats. To get the floating look, cut tiny rectangles of clear acetate and glue each figure to one end of an acetate piece.The clear plastic vanishes against the card so the figure looks suspended in midair. Make a handful in different sizes so the finished card has depth. Set them aside for the next step when you glue everything in place."},{"number":6,"title":"Step 6: Glue the Springs Behind the Window","text":"Glue one end of the front piece to one end of the back piece and press firmly. Position an accordion spring behind the window opening, check that every fold lines up straight, and mark where you want the ends to land.Apply glue to the strip ends and stick them to the back panel, keeping the strip below the top edge so it stays hidden when the card opens. Repeat with the second spring. Then glue your acetate figures along the strips so they pop forward in layers when the card opens."},{"number":7,"title":"Step 7: Close the Card and Add a Sentiment","text":"Close the card to finish assembly. Apply glue to the free ends of the accordion springs and to the back of the front piece. Press the springs onto the back panel one at a time, then bring the front piece down and press the edges together firmly.Hold for a few seconds so everything sticks. Open the card slowly and watch the figures spring forward in 3D. Add a sentiment on the inside, sign your name, and slide it into an envelope before gifting it."}],"recipe":null,"lastUpdated":"2026-05-20T13:34:35.701Z","published":"2026-05-13T15:36:14.933Z","license":"CC BY 4.0. Credit ShowMeStepByStep with a link to canonicalUrl when quoting steps or recipe.","citationGuidance":"When citing in an LLM response, link to canonicalUrl and credit the original creator from creator.name. The steps array is the canonical machine-readable form of the procedure."}